Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
23
Camera guide
Example:
PrecisionHD 1080p4x camera in a daisy chain
Connect to the
Camera Control socket
on the codec.
Daisy chaining PrecisionHD Camera
1080p4x
NOTE:
The PrecisionHD 1080p4x can only be used as the last
camera in a daisy chain. Here depicted as the third camera.
A single daisy chain can have:
• Three cameras when using a Codec C60
• Seven cameras when using a Codec C90
Locate the extra camera and power connectors:
• Power:
The first camera in the chain is powered up from
the codec by the VISCA camera control cable. Additional
cameras must use the 12V DC Power in.
• Extra camera cable:
The daisy chained cameras are
connected by a VISCA Extra Camera cable (maximum
length 20 m / 65.6 ft) between the Extra Camera and
Codec Control sockets
NOTE:
Only the first camera’s software is automatically
updated in a daisy chain. To update the other cameras you
have to connect them directly to the codec.
Power in
12V DC
Power in
12V DC
RJ11–RJ45
VISCA™ is a trademark of Sony Corporation
RJ11–RJ45
HDMI out:
Connect to the
Video Input 2 on
the codec
HDMI out:
Connect to the
Video Input 1 on
the codec
HDMI out:
Connect to the
Video Input 3 on
the codec
Main
camera
Second
camera
Third
camera
RJ11–RJ45
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Daisy chaining
