Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
22
Camera guide
Example:
PrecisionHD 1080p12x cameras in a daisy chain
Daisy chaining PrecisionHD Camera
1080p12x
A single daisy chain with PrecisionHD 1080p12x cameras can
have:
• Three cameras when using a Codec C60
• Seven cameras when using a Codec C90
Locate the extra camera and power connectors:
• Power:
The first camera in the chain is powered up from
the codec by a VISCA camera control cable. Additional
cameras must use the 12V DC Power in.
• Extra camera cable:
The daisy chained cameras are
connected by a VISCA Extra Camera cable (maximum
length 20 m / 65.6 ft) between the Extra Camera In and
Codec Control In sockets.
• HDMI and HD-SDI:
The HDMI and HD-SDI outputs can be
used simultaneously on the same camera.
NOTE:
Only the first camera’s software is automatically
updated in a daisy chain. To update the other cameras you
have to connect them directly to the codec.
Power in
12V DC
Power in
12V DC
Connect to
the Camera control
socket on the
codec.
RJ11–RJ45
HDMI out:
Connect to the
Video Input 2 on
the codec
HDMI out:
Connect to the
Video Input 1 on
the codec
HDMI out:
Connect to the
Video Input 3 on
the codec
RJ11–RJ45
VISCA™ is a trademark of Sony Corporation
RJ11–RJ45
Main
camera
Second
camera
Third
camera
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Daisy chaining
