Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
10
Camera guide
The orange LED is lit during a call.
PrecisionHD Camera 720p
HDMI
• HDMI is the main video source.
• The maximum resolution is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
• When the camera is used with a Cisco codec, power is
supplied through Camera control cable.
• When the camera is used with non-Cisco codecs, you
may have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
• The first camera in the chain is powered by the camera
control cable. The other cameras must use the 12V DC
Power in.
• Use an extra camera cable between the Extra camera
sockets.
Kensington lock
The Kensington lock may be used to prevent the camera being
moved from its place or to prevent theft.
HDMI video out Camera control
and power
Kensington lock
VISCA Daisy chain
Power in 12V DC
* Not supported with Codec C20.
The green LED is continuously lit when
power is On, and flickers when receiving
signals from the remote control.
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Physical Interface
