Cisco TelePresence PrecisionHD Camera
D14640.17 Cisco Telepresence PrecisionHD Camera Guide APRIL 2017
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
17
Camera guide
Pin-out for cables
If you must assemble your own cables, the tables show the pin-out required.
Camera cables
HDMI cable
The HDMI cable delivered with the camera is 5 meters.
Maximum length is 15 meter with a category 2 certified good
quality HDMI cable. This cable can be used with the C20, C40,
C60 and C90 Codecs.
Part number: CAB-2HDMI-5M=
HD–SDI cable
The HD-SDI cable must be purchased separately. The
maximum recommended length of HD–SDI cable is 100
meters. This cable can be used with the C90 Codec.
HDMI to DVI–D adapter
A HDMI to DVI–D adapter is used when connecting a camera to
a MXP Codec or a Video Switch.
Daisy chain camera cable
CAB-VCDC-6.5M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-6.5 m
CAB-VCDC-20M= PrecisionHD Camera Daisy-Chain cable for
Visca Control-20 m
Camera cable
Control cable for use with C90, C60, C40:
• CAB-VC-5M= Visca Control Cable 5 m - DB9 to RJ45
• CAB-VS-6.5M= Visca Control Cable 6.5 m - DB9 to RJ45 -
requires PSU-CAM-V=
• CAB-VS-20M= Visca Control Cable 20 m - DB9 to RJ45 -
requires PSU-CAM-V=
Pin-out—Daisy chain camera cable
RJ11 to RJ45 (8 pin shielded)
Signal name
RJ11
pin
RJ45
pin
Signal name
GND
1
2
GND
Presence
+12Vdc
2
1
Presence
+12Vdc
TX
3
3
RX
RX
4
6
TX
GND
5
7
GND
NC
6
8
NC
NA
NA
4
NC
NA
NA
5
NC
Pin-out—camera cable
RJ45 (8 pin shielded) to D-SUB
Signal name
RJ45
pin
D-SUB
pin
+12Vdc
1
4
GND
2
5
RX
3
2
TX
6
3
NC
4
1
NC
5
6
GND
7
5
+12Vdc
8
4
Contents
Introduction
Physical interface
Connecting the camera
Appendices
Daisy chaining
Video output format
Connecting the camera
