Cisco UCS C3160, Installation And Service Manual

Page: 56 / 106

3-16
Cisco UCS C3160 Rack Server Installation and Service Guide
OL-32062-01
Chapter 3 Maintaining the System
Installing or Replacing System Components
Installing or Replacing System Components
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Caution
When handling system components, wear an ESD strap to avoid electrostatic damage.
Caution
This system weighs approximately 190 pounds (86 kilograms) when fully loaded with components. We
recommend that you use a minimum of two people when lifting the system. Attempting to lift the system
alone could result in personal injury or equipment damage.
This section describes how to install and replace system components, and it includes the following
topics:
•
Replacing Hard Drives or Solid State Drives, page 3-17
•
Replacing Fan Modules, page 3-24
•
Replacing a Server Node, page 3-25
•
Replacing a Drive Expander Module, page 3-26
•
Replacing a System I/O Controller, page 3-27
•
Replacing a Power Supply, page 3-28
•
Replacing DIMMs Inside the Server Node, page 3-29
•
Replacing CPUs and Heatsinks Inside the Server Node, page 3-33
•
Replacing a RAID Controller Card Inside the Server Node, page 3-39
•
Replacing an RTC Battery Inside the Server Node, page 3-41
•
Replacing an Internal USB Drive Inside the Server Node, page 3-43
•
Replacing an Adapter Card Inside the SIOC, page 3-48
•
Replacing an RTC Battery Inside the SIOC, page 3-50
•
Service Headers on the Server Node Board, page 3-52
See also Replaceable Component Locations, page 1-3 .