manualshive.com logo in svg

Cisco UC520-8U-4FXO-K9, Getting Started

Share
Download
Cisco UC520-8U-4FXO-K9 Getting Started Download Page 44

44

•

Configure network settings for voice.

For more information about the Cisco Configuration Assistant, see the online help.

System Management Tools

Table 9

 summarizes tools that can be used for modify the software configuration on a Cisco Unified

500 Series before or while deploying the system or for performing routine, ongoing system
maintenance.

Cisco Configuration Assistant

The Cisco Configuration Assistant is installed on a PC or laptop that is connected to the Cisco Unified
500 Series by direct connection to a PoE port on the front panel of the platform, by connection to the
LAN, or via VPN client.

Table 9

System Management Tools

Management Tool

Description

Related
Information/Tasks/Procedures

Cisco Configuration
Assistant, page 44

Primary configuration
application for installing and
managing Cisco Unified
500 Series. Allows for
administration of voice,
networking, and security
features.

See the Getting Started with
Cisco Configuration Assistant at

http://www.cisco.com/go/configa
ssist or

on the CD-ROM that

shipped with the product.

For information about using this
tool, see online help.

GUI for Cisco Unified CME
and Cisco Unity Express,
page 45

Web-based application customer
administrators to make routine
additions and changes associated
with employee turnover, such as
adding or changing phones and
voice mailboxes and managing
automated attendant scripts.

Log Into Cisco Unified CME and
Cisco Unity Express GUI,
page 49

For information about using this
tool, see online help.

Cisco Unified CME Phone
User Page, page 45

Web-based application for phone
users to program a small set of
features on their phones.

Log Into Cisco Unified CME
Phone User Page, page 50

For information about using this
tool, see online help.

Summary of Contents for UC520-8U-4FXO-K9























































Reviews:

No comments

Brands by name

Popular brands

Load more brands