10
Figure 3
USB Cable Types
Note
The USB port on the Cisco uBR925 Cable Access Router is between the Voice Port and
Console Port connectors, and it is labeled with the USB icon shown in Figure 4:
Figure 4
USB Icon
Step 4
Verify that the USB LED on the front panel of the Cisco uBR925 Cable Access Router turns
on. If this LED does not come on, check that each connector on the USB cable is fully inserted
into the USB port on the computer (or USB hub) and the USB port on the Cisco uBR925 Cable
Access Router. If you are using a USB hub, verify that it is properly connected to the computer.
Step 5
The Windows software detects the installation of a new USB device and automatically begins
the software installation process. Proceed to the next section, “Installing the USB Driver for
a Windows PC” for instructions on installing the USB software driver.
36096
Host (Type 'A') Connector
Device (Type 'B') Connector
35463
