11
3
Installing the USB Driver for a Windows PC
This section describes how to install the Cisco USB driver software on a PC that is running Windows
98, Windows 98 Second Edition, Windows Millennium, or Windows 2000. This step is necessary to
establish communications over the USB interface between the PC and the Cisco uBR925 Cable Access
Router.
Note
The USB driver needs to be installed only when you are using a USB connection with
the Cisco uBR925 Cable Access Router. Do not install the USB driver if you are not using a
USB connection.
Step 1
When the Cisco uBR925 Cable Access Router is first connected to a PC that is running
Windows 98, Windows 98 Second Edition, Windows Millennium, or Windows 2000, a
window automatically appears informing you that new hardware has been detected. Figure 5
shows the window that appears for Windows 2000, but the other versions of Windows are
similar. Click Next to continue. (See Figure 5.)
Figure 5
Windows New Hardware Wizard
