background image

2

Contents

General information  ................................................................................................................ 3

About the Cisco TelePresence Server MSE 8710  ............................................. 3
Port and LED locations .............................................................................................. 3

LED behavior  .............................................................................................................................. 4

Front panel LED behavior  ........................................................................................ 4

Installing the Cisco TS MSE 8710 ......................................................................................... 5

Step one: Install the Cisco TS MSE 8710 blade into the MSE 8000 ............ 5
Step two: Allocate port licences  ............................................................................ 7
Step three: Connect to Ethernet Port A  .............................................................. 7

Initial configuration  ................................................................................................................. 8

Step one: Configure Ethernet Port A settings  .................................................. 8
Step two: Assign an IP address to the Cisco TS MSE 8710  ........................... 8

Configuring the Cisco TS MSE 8710  ................................................................................... 9

Step one: Log in to the Cisco TS MSE 8710 ........................................................ 9
Step two: Configuring settings, conferences, endpoints and rooms  ...... 9

Checking for updates  ............................................................................................................10
Troubleshooting and technical support information  ...............................................11

Using the event log to help solve a problem ..................................................11
Getting more help  ....................................................................................................11

Disclaimers and notices ........................................................................................................12

Summary of Contents for TelePresence MSE 8710













Reviews: