Configuring the Network
Basic Setup
Cisco SPA100Series Administration Guide
33
3
User Manual
If you prefer to set the system manually rather than automatically obtaining the
settings from an NTP server, click
User Manual
and then enter the date and time.
Time Zone
To use a time server to establish the time settings, select
Time Zone
. Then
complete the fields in this section.
Field
Description
Date
Enter the date in the following order: four-digit year,
month, day.
Time
Enter the time in the following order: hour (from 1 to 24),
minutes, and seconds.
Field
Description
Time Zone
Choose the time zone for the site where the ATA is in
operation.
Default setting: (GMT-08:00) Pacific Time (USA &
Canada)
Adjust Clock for
Daylight Saving
Changes
Check the box if you want to automatically adjust the
time when Daylight Savings Time is in effect. Otherwise,
uncheck the box.
Default setting: Enabled
Time Server
Address
To use the ATA’s default Network Time Protocol (NTP)
server, select
Auto
from the drop-down list. This is the
default setting. If you want to specify the NTP server,
select
Manual
, and then enter the NTP server address.
Default setting: Auto
Resync Timer
Enter the Resync timer interval value (in seconds). This
timer controls how often the ATA resynchronizes with
the NTP server.
Default setting: 3600 seconds
