Using the IVR for Administration
Cisco SPA100Series Administration Guide
132
8
•
If the menu is inactive for more than one minute, the IVR times out. You will
need to re-enter the IVR menu by pressing the star key four times:
****
. Your
settings take effect after you hang up the telephone or exit the IVR. The ATA
may reboot at this time.
•
To enter the decimal points in an IP address, press the
*
(star) key.
For example, to enter the IP address 191.168.1.105, perform the following
tasks:
–Press these keys: 191
*
168
*
1
*
105
–Press the
#
(pound) key to indicate that you have finished entering the
IP address.
–Press
1
to save the IP address or press the
*
(star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action
Menu
Option
Choices and Instructions
Enter IVR Menu
****
Check Internet
Addressing Method
100
IVR answers with 0, the default option
(DHCP.)
Set Internet Addressing
Method
101
DHCP: 0
Static IP: 1
PPPoE: Press 2
Check Internet IP
Address (INTERNET port)
110
Set Static IP Address
(INTERNET port)
111
Enter the IP address by using
numbers on the telephone key pad.
Use the
*
(star) key when entering a
decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check Network Mask
120
