Administration Settings
Management
Cisco SPA100Series Administration Guide
112
5
Settings for SNMPv3
Trap Configuration
Field
Description
Enabled, Disabled
Click
Enabled
to enable this feature, or click
Disabled
to
disable it. The default setting is Disabled.
R/W User
Enter the user name for SNMPv3 authentication. The
default value is v3rwuser.
Auth-Protocol
Choose the SNMPv3 authentication protocol from the
drop-down list (HMAC-MD5 or HMAC-SHA).
Auth-Password
Enter the authentication password.
PrivProtocol
Choose a privacy authentication protocol from the drop-
down list (None or CBC-DES). If you select CBCDES, the
privKey encrypts the data portion of the message that is
being sent.
Privacy Password
Enter the key for the authentication protocol to use.
Field
Description
IP Address
The IP Address of the SNMP manager or trap agent.
Port
The SNMP trap port used by the SNMP manager or trap
agent to receive the trap messages. Valid entries are
162 or 1025~65535. The default value is162.
SNMP Version
The SNMP version in use by the SNMP manager or trap
agent. Choose a version from the list.
