Cisco SMART BUSINESS COMMUNICATIONS SYSTEM, Feature Reference, Page: 8 / 27

Feature Description Guide
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 27
trunk status, phone templates, voicemail status, DSP status, and
software pack status.
Expert mode monitoring and
troubleshooting X X Enter Cisco IOS Software and Cisco Unity Express exec mode
commands and view output.
View show command output for selected Cisco IOS Software and
Cisco Unity Express commands.
CLI postview X X Enable display of Cisco IOS Software commands sent to Cisco Unified
Communications 500 Series when telephony configuration is applied.
Online Help X X
Remote Teleworker Deployment
Soft phone (Cisco IP
Communicator) X X
Cisco 871W Integrated
Services Router X X EzVPN client on 871W, EzVPN server on Cisco Unified
Communications 500 Series
Cisco SR500 Series Secure
Routers X X EzVPN client on 871W, EzVPN server on Cisco Unified
Communications 500 Series
Codec configuration X X
Firewall/NAT Traversal
(MTP) X X Configured automatically for Cisco IP Communicator phones in Cisco
Configuration Assistant
Transcoding X X
VPN Phone Setup Wizard X X Step-by-step wizard for enabling and configuring SSL VPN client
settings for Cisco SPA525G and SPA525G2 phones (day 0 and day
2)
Multisite SBCS Deployment
H.323 and SIP voice over IP
(VoIP) parameters X X
Call admission control
(CAC) X X
Dynamic DNS (DDNS) X X
Quality of service (QoS)
traffic shaping X X
Cisco Configuration Assistant Switching Feature Support
Table 2 lists the switching features that are supported by Cisco Configuration Assistant 2.2(5) and Cisco
Configuration Assistant 3.0.
Table 2. Cisco Configuration Assistant Switch Feature Support
Cisco Configuration Assistant Switch Feature Support
Category Feature v2.2(5) v3.0 Description
Layer 2 Switching
Cisco Small Business ESW
500 Series Switches X X Access the ESW 500 Series Switch Configuration Utility from the
Cisco Configuration Assistant Topology View to configure additional
features.
Cisco Catalyst
®
Express
500 Series Switches
X X
Spanning Tree Protocol X X Catalyst Express 500 Series only
Fast convergence using 802.1w, enabled by default
Portfast: supported on “Desktop,” “Phone + Desktop,” “Printer,” and
“Server” Smartports roles
MAC addresses X X Catalyst Express 500 Series only
Read-only display of MAC address table from switch
Virtual LANs (VLANs) X X Up to 32 VLANs (1000 range) and support for 802.1Q trunking using
Cisco Smartports
Number and type of queues X X 4 queues per port
Shaped Round Robin (SRR) queuing