Cisco Small Business WRP400 Administration Manual Download Page 65

Page: 65 / 173

Advanced Voice Fields

SIP page

Cisco Small Business WRP400 Administration Guide

Voice tab > SIP page >

SIP Parameters section

Max Forward

SIP Max Forward value, which can range from 1 to 255.

The default is

Max Redirection

Number of times an invite can be redirected to avoid an
infinite loop.

The default is

Max Auth

Maximum number of times (from 0 to 255) a request may
be challenged.

The default is

SIP User Agent
Name

User-Agent header used in outbound requests.

The default is

$VERSION

. If empty, the header is not

included. Macro expansion of $A to $D corresponding to
GPP_A to GPP_D allowed.

SIP Server Name

Server header used in responses to inbound responses.

The default is

$VERSION

SIP Reg User Agent
Name

User-Agent name to be used in a REGISTER request. If this
value is not specified, the

SIP User Agent Name

parameter

is also used for the REGISTER request.

The default is blank.

SIP Accept
Language

Accept-Language header used. There is no default (this
indicates the WRP400 does not include this header). If
empty, the header is not included.

DTMF Relay MIME
Type

MIME Type used in a SIP INFO message to signal a DTMF
event.

The default is

application/dtmf-relay

Hook Flash MIME
Type

MIME Type used in a SIP INFO message to signal a hook
flash event.

The default is

application/hook-flash

Remove Last Reg

Lets you remove the last registration before registering a
new one if the value is different. Select yes or

no from the

drop-down menu.

The default is

Summary of Contents for Small Business WRP400














































































































































































Search results

Summary of Contents for Small Business WRP400

Reviews:

Related manuals for Small Business WRP400

Brands by name

Popular brands

Cisco Small Business WRP400, Administration Manual

Search results

Summary of Contents for Small Business WRP400

Reviews:

Related manuals for Small Business WRP400

Brands by name

Popular brands