manualshive.com logo in svg

Cisco Small Business WAP551, Administration Manual

The Cisco Small Business WAP551 offers blazing fast wireless connectivity for your small business. With its comprehensive Brochure & Specs manual available for download, setting up and optimizing your network has never been easier. Access the user manual for free at manualshive.com, ensuring seamless integration and maximum performance.

Share
Download
background image

Client Quality of Service

Class Map

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point

127

7

1024 to 49151—Registered Ports

49152 to 65535—Dynamic and/or Private Ports

•

EtherType—Compares the match criteria against the value in the header of an Ethernet 
frame. 

Select an EtherType keyword or enter an EtherType value to specify the match criteria.

-

Select from List—Matches the Ethertype in the datagram header with the selected 
protocol types: appletalk, arp, ipv4, ipv6, ipx, netbios, pppoe.

-

Match to Value—Matches the Ethertype in the datagram header with a custom 
protocol identifier that you specify. The value can be a four-digit hexadecimal 
number in the range of 0600 to FFFF.

•

Class of Service—A class of service 802.1p user priority value to be matched for the 
packets. The valid range is from 0 to 7.

•

Source MAC Address—A source MAC address to compare against an Ethernet frame.

•

Source MAC Mask—The source MAC address mask specifying which bits in the 
destination MAC to compare against an Ethernet frame.

For each bit position in the MAC mask, a 0 indicates that the corresponding address bit 
is significant and a 1 indicates that the address bit is ignored. For example, to check only 
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A 
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single 
MAC address. 

•

Destination MAC Address—The destination MAC address to compare against an 
Ethernet frame.

•

Destination MAC Mask—The destination MAC address mask specifying which bits in 
the destination MAC to compare against an Ethernet frame.

For each bit position in the MAC mask, a 0 indicates that the corresponding address bit 
is significant and a 1 indicates that the address bit is ignored. For example, to check only 
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A 
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single 
MAC address. 

•

VLAN ID—A VLAN ID to be matched for packets. The VLAN ID range is 
from 0 to 4095.

The following Service Type fields show for IPv4 only. You can specify one type of service 
to use in matching packets to class criteria.

Summary of Contents for Small Business WAP551


































































































































































































































Reviews:

No comments

Related manuals for Small Business WAP551

Medion Powerline MD 90222 Instruction Manual preview
Powerline MD 90222
Brand: Medion Pages: 124
Pakedge W6x User Manual preview
W6x
Brand: Pakedge Pages: 62
Alcatel-Lucent AOS-W 3.4 Quick Start Manual preview
AOS-W 3.4
Brand: Alcatel-Lucent Pages: 7
Asante FriendlyNET FR3002AL User Manual Addendum preview
FriendlyNET FR3002AL
Brand: Asante Pages: 16
P1 dx-825 Setup Manual preview
dx-825
Brand: P1 Pages: 10
Kraun 150Mbps ADSL2/2+ User Manual preview
150Mbps ADSL2/2+
Brand: Kraun Pages: 67
HP Enterprise Aruba 340 Series Startup Manual preview
Aruba 340 Series
Brand: HP Enterprise Pages: 3
HPE Aruba AP-518 Product End-Of-Life Disassembly Instructions preview
Aruba AP-518
Brand: HPE Pages: 4
HPE Aruba AP11-RW Product End-Of-Life Disassembly Instructions preview
Aruba AP11-RW
Brand: HPE Pages: 4
EnGenius EOA7535 User Manual preview
EOA7535
Brand: EnGenius Pages: 45
EnGenius EOC-2610 User Manual preview
EOC-2610
Brand: EnGenius Pages: 60
EnGenius ENH1750EXT User Manual preview
ENH1750EXT
Brand: EnGenius Pages: 75
EnGenius ENS500 User Manual preview
ENS500
Brand: EnGenius Pages: 84
EnGenius ENS202 User Manual preview
ENS202
Brand: EnGenius Pages: 86
EnGenius ENS500EXT User Manual preview
ENS500EXT
Brand: EnGenius Pages: 88
EnGenius ENS200EXT User Manual preview
ENS200EXT
Brand: EnGenius Pages: 90
EnGenius ENH202 User Manual preview
ENH202
Brand: EnGenius Pages: 88
Nortel 7220 Installing Manual preview
7220
Brand: Nortel Pages: 34

Brands by name

Popular brands

Load more brands