manualshive.com logo in svg

Cisco SCE8000 GBE, Configuration Manual

The Cisco SCE8000 GBE Configuration Manual is a comprehensive guide that assists users in optimizing the performance of their network with this powerful product. Download this manual for free from manualshive.com to unlock the full potential of your Cisco SCE8000 GBE and enhance your network management capabilities.

Share
Download
background image

2-2

Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S

OL-16479-01

Chapter 2      Command Line Interface

  Authorization and Command Levels (Hierarchy)

The following table lists commands you can enter to get help that is specific to a command mode, a 
command, a keyword, or an argument.

Authorization and Command Levels (Hierarchy) 

When using the CLI there are two important concepts that you must understand to navigate:

  •

Authorization Level  — Indicates the level of commands you can execute. A user with a simple 
authorization level can only view some information in the system, while a higher level administrator 
can actually make changes to configuration.

This manual documents commands up to and including the admin authorization level.

  •

Command Hierarchy Level  — Provides you with a context for initiating commands. Commands are 
broken down into categories and you can only execute each command within the context of its 
category. For example, to configure parameters related to the Line Card, you need to be within the 
Linecard Interface Configuration Mode. (See 

CLI Command Hierarchy, page 2-3

.)

The following sections describe the available Authorization and Command Hierarchy Levels and how to 
maneuver within them.

The on-screen prompt indicates both your authorization level and your command hierarchy level, as well 
as the assigned hostname.

Note

Throughout the manual, SCE is used as the sample host name.

Table 2-1

Getting Help

Command

Purpose

?

List all commands available for a particular 
command mode

<abbreviated-command-entry>?

Example:

c?   

 

calendar  cd  clear  clock  configure  copy  

copy-passive  

Obtain a list of commands that begin with a 
particular character string.

(Do not leave a space between the command and 
question mark.)

<abbreviated-command-entry><Tab>

Example:

en <Tab>

 

enable

Complete a partial command name.

<command>?

List the keywords associated with the specified 
command.

<command keyword>?

Example:

show ?

 

access-lists      Show all access-lists

List the arguments associated with the specified 
keyword.

Leave a space between the keyword and question 
mark

Summary of Contents for SCE8000 GBE







































































































































































































































































Reviews:

No comments

Related manuals for SCE8000 GBE

ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
Daikin BRC1E61 Operation Manual preview
BRC1E61
Brand: Daikin Pages: 56
Danfoss ERC 211 User Manual preview
ERC 211
Brand: Danfoss Pages: 36
Harman AMX JPK-1300 Quick Start Manual preview
AMX JPK-1300
Brand: Harman Pages: 2
T-Link TL300 Quick Install Manual preview
TL300
Brand: T-Link Pages: 3
Samson 3277 Quick Manual preview
3277
Brand: Samson Pages: 2
ICP DAS USA I-7188XA User Manual preview
I-7188XA
Brand: ICP DAS USA Pages: 166
ICP DAS USA SG-3016 User Manual preview
SG-3016
Brand: ICP DAS USA Pages: 5
ICP DAS USA SMS-531 User Manual preview
SMS-531
Brand: ICP DAS USA Pages: 64
ICP DAS USA M-7000 series Quick Start Manual preview
M-7000 series
Brand: ICP DAS USA Pages: 7
ICS Tunnel Master Jr Manual preview
Tunnel Master Jr
Brand: ICS Pages: 83
ICP DAS USA PROFIBUS PROFI-2510 Quick Start preview
PROFIBUS PROFI-2510
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-8213W-4G User Manual preview
I-8213W-4G
Brand: ICP DAS USA Pages: 40
Parker A4W Series Installation And Service Information preview
A4W Series
Brand: Parker Pages: 12
Sanhua DPF Series Instructions preview
DPF Series
Brand: Sanhua Pages: 3
QED MP50 Instruction Manual preview
MP50
Brand: QED Pages: 26
Yaesu FT-2000 - MENU MODE LIST Operating Manual preview
FT-2000 - MENU MODE LIST
Brand: Yaesu Pages: 56
Eaton Cutler-Hammer Jockey Instructions Manual preview
Cutler-Hammer Jockey
Brand: Eaton Pages: 12

Brands by name

Popular brands

Load more brands