Configuring the Firewall
Configuring Access Rules
Cisco RV110W Administration Guide
86
4
To create a custom service:
STEP 1
Choose
Firewall
>
Service Management
.
STEP 2
Click
Add Row
.
STEP 3
In the
Service
Name
field, enter the service name for identification and
management purposes.
STEP 4
In the
Protocol
field, choose the Layer 4 protocol that the service uses from the
drop-down menu:
•
TCP
•
UDP
•
TCP & UDP
•
ICMP
STEP 5
In the
Start Port
field, enter the first TCP or UDP port of the range that the service
uses.
STEP 6
In the
End Port
field, enter the last TCP or UDP port of the range that the service
uses.
STEP 7
Click
Save
.
To edit an entry, select the entry and click
Edit
. Make your changes, then click
Save
.
Configuring Access Rules
Configuring the Default Outbound Policy
The
Access Rules
page allows you to configure the default outbound policy for
the traffic that is directed from the secure network (LAN) to the non-secure
network (dedicated WAN/optional).
The default inbound policy for traffic flowing from the non-secure zone to the
secure zone is always blocked and cannot be changed.
