Configuring Networking
Configuring IPv6
Cisco RV110W Administration Guide
53
2
STEP 3
Enter this information:
STEP 4
Click
Save
.
To edit the settings of a route, select the route and click
Edit
. To delete a selected
route, click
Delete
. Click
Save
to apply changes.
Name
Enter the route name.
Destination
Enter the IPv6 address of the destination host or
network for this route.
Prefix Length
Enter the number of prefix bits in the IPv6 address
that define the destination subnet.
Gateway
Enter the IPv6 address of the gateway through
which the destination host or network can be
reached.
Interface
Choose the interface for the route from the
drop-down menu:
LAN
,
WAN
, or
6to4
.
Metric
Enter the priority of the route by choosing a value
between 2 and 15. If multiple routes to the same
destination exist, the route with the lowest metric is
used.
Active
Check to make the route active.
When you add a route in an inactive state, it gets
listed in the routing table, but is not used by the
Cisco RV110W. You can always activate the route
later.
This feature is useful if the network that the route
connects to is not available when you added the
route. When the network becomes available, you
can enable the route.
