10
RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide
78-12288-02
Removing the RSP4+
Step 6
Use the RSP4+ handle to carefully pull it straight out of the slot, keeping your other hand under the
carrier to guide it. (See Figure 2.) Keep the RSP4+ parallel to the backplane. Avoid touching the board
or any connector pins.
Step 7
Place the removed RSP4+ on an antistatic mat or foam pad for installation later in this procedure.
Figure 1
Ejector Levers and Captive Installation Screws on the RSP4+—Vertical Orientation Shown
H1482a
Processor module
slot
c
STOP!
on contact
Bottom ejector lever
Processor
module
carrier guide
