16
RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide
78-12288-02
Loading and Configuring the Bootflash Image
Step 1
Boot the router, and allow it to initialize.
Step 2
Use the enable command to enter privileged mode so you can configure the new 16MB bootflash:
Router> en
Password:
Router#
Step 3
Use the show version command to confirm the size of the bootflash. The following example shows an
16MB bootflash output:
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV56I-M), Version 12.1(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 19-Jul-00 22:18 by ccai
Image text-base: 0x60010968, data-base: 0x618D2000
ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
BOOTFLASH: RSP Software (RSP-BOOT-M), Version 12.0(8)S, EARLY DEPLOYMENT RELEAS)
doc-7507 uptime is 12 weeks, 3 days, 21 hours, 29 minutes
System returned to ROM by bus error at PC 0x60330F20, address 0x6229
System image file is "slot0:rsp-jsv56i-mz.121-3.T"
cisco RSP8 (R7000) processor with 131072K/8216K bytes of memory.
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
1 VIP2 controller (1 FastEthernet).
1 FastEthernet/IEEE 802.3 interface(s)
2043K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
16384K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 3.
Configuration register is 0x102
Step 4
Use the format bootflash command to format the bootflash memory, as shown in the following
example:
Router#format bootflash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "bootflash:". Continue? [confirm]
Formatting sector 1
Format of bootflash complete
Router#
