2-19
Cisco Physical Access Gateway User Guide
OL-32499-01
Chapter 2 Installing and Configuring the Cisco Physical Access Gateway
Configuring and Managing the Gateway Using a Direct Connection
–
Reset Factory Defaults:
This command deletes all information on the device (including log and
event data), resets the password and all other configurations to the factory default. Any custom
configurations previously entered on the device are also removed.
–
Delete Events:
delete all events stored on the Gateway.
–
Delete Configuration
: delete the module configuration. The configuration is automatically
dowloaded when the gateway establishes communication with the Cisco PAM appliance.
–
Delete Credentials
: delete the credential data stored on the Gateway.The credential is
automatically downloaded when the gateway establishes communication with Cisco PAM
appliance.
Note
•
Changes do not take effect until saved.
•
Delete Events,Delete Configuration,Delete Credentials
includes an application reset of the gateway.
Step 5
Repeat
Step 1
through
Step 4
for each Gateway in the system.
Step 6
Perform additional configuration, verification, and monitoring tasks as described in the
Cisco Physical
Access Manager User Guide
.
Changing the User Password
Tip
You can also change the password for one or more Gateways using the Cisco PAM desktop software. See
the “Changing Gateway Passwords” section in the
Cisco Physical Access Manager User Guide
for more
information.
The Gateway password can be added/reset from CPAM also.