If you have not already installed the front doors, see
Installing the Front Doors, on page 46
for instructions
on how to install the air filters on the front doors before installing the doors. Otherwise, use these instructions
to install the air filters on the already installed front doors.
Before You Begin
•
Cable management frames are fully installed on the chassis
•
Front doors are either installed on the chassis (if the front doors are ready to be installed on the chassis,
see
Installing the Front Doors, on page 46
.
Procedure
Step 1
Install two door filters and two door-side filters on the two front doors as follows:
a) Remove one of the two front doors by pulling in on both of the two spring pins holding the door to the
top hood and divider frames, and set the door down on its front side.
The hollowed side of the door faces up.
Cisco Nexus 7718 Switch Site Preparation and Hardware Installation Guide
OL-30453-01
49
Installing the Chassis
Installing the Air Filters
