Cisco Nexus 7000 Series Command Reference Manual Download Page 959

Page: 959 / 1018

show vlan access-map

To display all VLAN access maps or a VLAN access map, use the

show vlan access-map

command.

show vlan access-map map-name

Syntax Description

VLAN access map, which can be up to 64
alphanumeric, case-sensitive characters.

map-name

Command Default

None

Command Modes

Any command mode

Command History

Modification

Release

Command output is sorted alphabetically by the ACL names.

4.2(1)

This command was introduced.

4.0(1)

Usage Guidelines

The device shows all VLAN access maps, unless you use the

map-name

argument to specify an access map.

If you do not specify an access-map name, the device lists VLAN access maps alphabetically by access-map
name.

For each VLAN access map displayed, the device shows the access-map name, the ACL specified by the

match

command, and the action specified by the

action

command.

Use the

show vlan filter

command to see which VLANs have a VLAN access map applied to them.

This command does not require a license.

Examples

This example shows how to remove dynamically learned, secure MAC addresses from the Ethernet 2/1
interface:

switch#

show vlan access-map

Vlan access-map austin-vlan-map

match ip: austin-corp-acl
action: forward

Cisco Nexus 7000 Series Security Command Reference

933

Show Commands

show vlan access-map

Summary of Contents for Nexus 7000 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands

Cisco Nexus 7000 Series, Command Reference Manual

Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands