Cisco Nexus 7000 Series Command Reference Manual Download Page 67

Page: 67 / 1018

aaa authorization cts default group

To configure the default authentication, authorization, and accounting (AAA) RADIUS server groups for
Cisco TrustSec authorization, use the

aaa authorization cts default group

command. To remove a server

group from the default AAA authorization server group list, use the

form of this command.

aaa authorization cts default group group-list

no aaa authorization cts default group group-list

Syntax Description

Space-separated list of RADIUS server groups that
can include the following:

•

radius

for all configured RADIUS servers.

•

Any configured RADIUS server group name.

The maximum number of names in the list is eight.

group-list

Command Default

None

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

4.0(1)

Usage Guidelines

To use the

aaa authorization cts default group

command, you must enable the Cisco TrustSec feature using

the

feature cts

command.

The

group-list

refers to a set of previously defined RADIUS servers. Use the

radius-server host

command

to configure the host servers. Use the

aaa group server

command to create a named group of servers.

Use the

show aaa groups

command to display the RADIUS server groups on the device.

If you specify more that one server group, the Cisco NX-OS software checks each group in the order that you
specify in the list.

This command requires the Advanced Services license.

Examples

This example shows how to configure the default AAA authorization RADIUS server group for Cisco TrustSec:

switch#

configure terminal

switch(config)#

aaa authorization cts default group RadGroup

Cisco Nexus 7000 Series Security Command Reference

A Commands

aaa authorization cts default group

Summary of Contents for Nexus 7000 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands

Cisco Nexus 7000 Series, Command Reference Manual

Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands