Cisco Nexus 7000 Series Command Reference Manual Download Page 69

Page: 69 / 1018

aaa authorization ssh-certificate

To configure the default AAA authorization method for or Lightweight Directory Access Protocol
(LDAP) servers, use the

aaa authorization ssh-certificate

command. To disable this configuration, use the

form of this command.

aaa authorization ssh-certificate default

{

group group-list| local

}

no aaa authorization ssh-certificate default

{

group group-list| local

}

Syntax Description

Specifies to use a server group for authorization.

group

Space-separated list of server groups. The list can
include the following:

•

for all configured servers.

•

ldap

for all configured LDAP servers.

•

Any configured or LDAP server
group name.

group-list

Specifies to use the local database for authentication.

local

Command Default

local

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

5.0(2)

Usage Guidelines

To use this command, you must enable the feature using the

feature

command or the

LDAP feature using the

feature ldap

command.

The

group

group ldap

, and

group group-list

methods refer to a set of previously defined

and LDAP servers. Use the

tacacs-server host

command or

ldap-server host

command to configure the host

servers. Use the

aaa group server

command to create a named group of servers. Use the

show aaa groups

command to display the server groups on the device.

If you specify more than one server group, the Cisco NX-OS software checks each group in the order that
you specify in the list. The

local

method is used only if all the configured server groups fail to respond and

you have configured

local

as the fallback method.

Cisco Nexus 7000 Series Security Command Reference

A Commands

aaa authorization ssh-certificate

Summary of Contents for Nexus 7000 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands

Cisco Nexus 7000 Series, Command Reference Manual

Search results

Summary of Contents for Nexus 7000 Series

Reviews:

Related manuals for Nexus 7000 Series

Brands by name

Popular brands