Purpose
Command or Action
(Optional)
Displays the CoPP configuration in the running
configuration, including the copied policy
configuration.
show running-config copp
Example:
switch# show running-config copp
Step 3
Verifying the CoPP Configuration
To display CoPP configuration information, perform one of the following tasks:
Purpose
Command
Displays the control plane policy
map with associated class maps and
CIR and BC values.
show policy-map type control-plane
[
expand
] [
name
policy-map-name
]
Displays the policy values with
associated class maps and drops
per policy or class map. It also
displays the scale factor values
when a CoPP policy is applied.
When the scale factor value is the
default (1.00), it is not displayed.
The scale factor changes
the CIR and BC values
internally on each module,
but the display shows the
configured CIR and BC
values only. The actual
applied value on a module
is the scale factor
multiplied by the
configured value.
Note
show policy-map interface control-plane
Displays the control plane class
map configuration, including the
ACLs that are bound to this class
map.
show class-map type control-plane
[
class-map-name
]
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
135
Configuring Control Plane Policing
Verifying the CoPP Configuration
