Cisco Nexus 3600 NX-OS Security Configuration Manual Download Page 25

Page: 25 / 154

The following figure shows a flowchart of the authentication and authorization process.

Figure 1: Authentication and Authorization Flow for User Login

Note

In the figure, "No more servers left" means that there is no response from any server within this server group.

Prerequisites for Remote AAA

Remote AAA servers have the following prerequisites:

•

At least one RADIUS or server must be IP reachable.

•

The Cisco Nexus device is configured as a client of the AAA servers.

•

The preshared secret key is configured on the Cisco Nexus device and on the remote AAA servers.

•

The remote server responds to AAA requests from the Cisco Nexus device.

Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x

Configuring AAA

Prerequisites for Remote AAA

Summary of Contents for Nexus 3600 NX-OS



























































































































































Search results

Summary of Contents for Nexus 3600 NX-OS

Reviews:

Related manuals for Nexus 3600 NX-OS

Brands by name

Popular brands

Cisco Nexus 3600 NX-OS, Security Configuration Manual

Search results

Summary of Contents for Nexus 3600 NX-OS

Reviews:

Related manuals for Nexus 3600 NX-OS

Brands by name

Popular brands