Cisco Nexus 2000 Series, Installation Manual

Page: 78 / 190

2-20
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Cisco Nexus 2232TM FEX
Figure 2-20 Port-Side Intake Airflow Fan Tray for the Cisco Nexus 2232PP and 2232TM FEXs
For more information on this fan tray, see the fan tray specifications in Appendix B, “Technical
Specifications” . For LED descriptions, see Appendix E, “LEDs” .
Transceivers and Connectors Supported by the Cisco Nexus 2232TM FEX
The Cisco Nexus 2232TM FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to eight fabric uplink connections to the following Cisco Nexus 7000 Series
switch I/O modules:
•
F2 Series 48-port 10-Gigabit I/O module (N7K-F248XP-25)
•
M1 Series 32-port, 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
•
M1 Series 32-port, 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
• M2 Series 24-port 10-Gigabit I/O module (N7K-M224XP-23L)
You must use the same transceivers on both ends of the same uplink cable.
239936
2
1
3
1
1
Captive screws (2)
3
Port-side intake airflow indicated by
a black stripe on the front.
2
Handle used for removing and installing the module
4
Status LED