manualshive.com logo in svg

Cisco Nexus 1000V, Troubleshooting Manual, Page: 60 / 280

Share
Download
Cisco Nexus 1000V Troubleshooting Manual Download Page 60

 

5-4

Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)

OL-31593-01

Chapter 5      Upgrades

Problems with the In-Service Software Upgrade

Error message:

Another install procedure 

may be in progress. 

(0x401E0007)

Another upgrade session is in 
progress from a VSM console 
or SSH/Telnet.

Do one of the following:

•

Continue the first upgrade session in progress.

•

Stop the upgrade and restart one session only using the 
instructions in the 

Cisco Nexus 1000V Installation and 

Upgrade Guide

.

The 

install

 command fails 

with following error 
message:

-- FAIL. Return code 

0x4093001E (Standby 

failed to come online)

Install has failed. Return 

code 0x4093001E (Standby 

failed to come online)

The standby VSM fails to 
boot with the new image.

Do one of the following:

•

Restart the software upgrade using the instructions in 
the 

Cisco Nexus 1000V Installation and Upgrade Guide

.

•

Postpone the upgrade and reset the boot variables to the 
original filenames.

boot kickstart

 

filename

 [

sup-1

] [

sup-2

]

The 

install

 command fails 

with following error 
message:

Install has failed. 

Return code 0x4093001F 

(Standby installer failed 

to take over the 

installation).

Please identify the cause 

of the failure, and try 

“install all” again”

The standby VSM takes more 
than 10 minutes to come up 
and form a stable HA pair 
with the active VSM.

1.

Reset the boot variables to the original filenames.

boot kickstart

 

filename

 [

sup-1

] [

sup-2

]

2.

If the standby is still running the new software version, 
reload it. 

reload

The standby synchronizes with the active, so that both 
are running the original software version.

The 

install

 command fails 

with following error 
message:

Module 2: Waiting for 

module online.

 -- SUCCESS

-- Install has failed. 

Return code 0x40930000 

(Current operation failed 

to complete within 

specified time)

A failure at the standby VSM 
caused it to reload again after 
the 

Continuing with 

installation, please wait

 

message and before the 
switchover.

1.

Inspect the logs.

show logging

2.

Look for standby reloads caused by process failures.

show cores

If a process crash is observed, collect details of the 
upgrade and open a support case.

show system internal log install details

3.

Restart the software upgrade using the instructions in 
the 

Cisco Nexus 1000V Installation and Upgrade Guide

.

The pre-upgrade check 
failed:

Return code 0x40930062 
(free space in the filesystem 
is below threshold).

1.

Table 5-1

 (continued)Problems with the ISSU

Symptom

Possible Causes

Solution

Summary of Contents for Nexus 1000V

























































































































































































































































































Reviews:

No comments