manualshive.com logo in svg

Cisco Nexus 1000V, Troubleshooting Manual, Page: 85 / 280

Share
Download
Cisco Nexus 1000V Troubleshooting Manual Download Page 85

 

6-9

Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)

OL-31593-01

Chapter 6      High Availability

High Availability Troubleshooting Commands

MSYNC done.

Remote MSYNC not done.

Module online notification received.

Local super-state is: SYSMGR_SUPERSTATE_STABLE

Standby super-state is: SYSMGR_SUPERSTATE_STABLE

Swover Reason : SYSMGR_SUP_REMOVED_SWOVER 

<-- Reason for the last switchover

Total number of Switchovers: 0 

<-- Number of switchovers 

>> Duration of the switchover would be listed, if any.

        Statistics:

Message count:           0

Total latency:           0              Max latency:             0

Total exec:              0              Max exec:                0

When a role collision is detected, a warning is highlighted in the CLI output. Use the following command 
to display the CLI output:

Example 6-6

show system redundancy status Command

switch# 

show system redundancy status

Redundancy role

---------------

administrative: secondary

operational: secondary

Redundancy mode

---------------

administrative: HA

operational: HA

This supervisor (sup-2)

-----------------------

Redundancy state: Active

Supervisor state: Active

Internal state: Active with HA standby

Other supervisor (sup-1)

------------------------

Redundancy state: Standby

Supervisor state: HA standby

Internal state: HA standby

WARNING! Conflicting sup-2(s) detected in same domain

-----------------------------------------------------

MAC Latest Collision Time

00:50:56:97:02:3b 2012-Sep-11 18:59:17

00:50:56:97:02:3c 2012-Sep-11 18:59:17

00:50:56:97:02:2f 2012-Sep-11 18:57:42

00:50:56:97:02:35 2012-Sep-11 18:57:46

00:50:56:97:02:29 2012-Sep-11 18:57:36

00:50:56:97:02:30 2012-Sep-11 18:57:42

00:50:56:97:02:36 2012-Sep-11 18:57:46

00:50:56:97:02:2a 2012-Sep-11 18:57:36

NOTE: Please run the same command on sup-1 to check for conflicting(if any) sup-1(s) in 

the same domain.

If no collisions are detected, the highlighted output is not displayed.

Use the following command to display the accounting logs that are stored on a remote VSM.

Summary of Contents for Nexus 1000V

























































































































































































































































































Reviews:

No comments