6-10
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 6 High Availability
High Availability Troubleshooting Commands
Example 6-7
show system internal active-active remote accounting logs Command
switch#
show system internal active-active remote accounting logs
To reload a module, use the following command:
Example 6-8
reload module Command
switch#
reload module 2
This command reloads the secondary VSM.
Note
Entering the
reload
command without specifying a module will reload the whole system.
To attach to the standby VSM console, use the following command.
Example 6-9
attach module Command
The standby VSM console is not accessible externally, but can be accessed from the active VSM
through the
attach module
module-number
command.
switch#
attach module 2
This command attaches to the console of the secondary VSM.