Figure 7: Mount Slider Brackets
Screws
2
Slider brackets
1
Step 4
Install the router onto the 2-post rack as follows:
a) Holding the router with both hands, position the back of the router between the front posts of the rack.
b) Move the router until the slider brackets come in contact with slider rails installed in the rack. Slide the slider brackets
onto the slider rails, and then gently move the router all the way into the rack.
c) Hold the chassis level while the second person inserts two pan-head screws (12-24) in each of the two rack-mount
brackets (using a total of four screws) and into the cage nuts or threaded holes in the vertical rack-mounting rails.
d) Tighten the 12-24 screws to 30 in-lb (3.39 N.m).
Install the Chassis
9
Install the Chassis
Rack Mount the NCS-57C1 Chassis in a 2-Post Rack with Sliders
