Figure 24: Rear and Front End (NC55-2RU-ACC-SL1) of the Outer Slider Member
Screw thread adapter at the
Front End- Outer slider
member
2
Rear End- Outer slider
member
1
Outer slider member
3
(
NC55-2RU-ACC-SL2
) Adjust the slider (push and pull) to place and fix the slider behind the front post. Attach
the slider to the front post with 2 counter sink screws (10-32) and washers. See
(NC55-2RU-ACC-SL2) of the Outer Slider Member
Remove the screw thread adapter present at the front end of the outer slider member if you are unable to
pass the slider through the rack holes. Tighten the screws later after passing the slider through the rack
holes.
Note
Install the Chassis
27
Install the Chassis
Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders
