a.
Align the inner slider member with one side of the chassis and use three M4 x 10-mm pan head screws and tighten
the screws to 12 in-lbs (1.4 N-m).
b.
Repeat this step to install the inner slider member to the other side of the chassis.
Figure 22: Install the Inner Slider Member to the Chassis
M4 x 10-mm Phillips pan
head screws.
2
Inner slider member
1
For
NC55-2RU-ACC-SL2
, attach the inner slider member to the sides of the tray:
a.
Align the inner slider member with one side of the tray and use seven M4 x 8-mm flat head screws and tighten the
screws to 12 in-lbs (1.4 N-m).
b.
Repeat this step to install the inner slider member to the other side of the tray.
Install the Chassis
25
Install the Chassis
Rack Mount the NCS-57C3-MOD Chassis in a 4-Post Rack using Sliders
