Cisco N9K-C9332D-GX2B, Hardware Installation Manual

Page: 42 / 50

Switch and Module Weights and Quantities
Quantity Weight per Unit Component
1 28 lb (12.7 kg) Cisco Nexus 9332D-GX2B Chassis (N9K-C9332D-GX2B)
6 —
0.26 lb (0.12 kg)
Fan Module
– Port-side intake (burgundy) (NXA-SFAN-35CFM-PI)
2 (1 for
operations
and 1 for
redundancy) —
2.64 (1.2 kg)
Power Supplies
– 1500-W AC port-side intake (burgundy) (NXA-PAC-1500W-PI)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see https://www.cisco.com/
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html .
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html .
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Note
Heat Dissipation
Requirement Maximum Power
Consumption (AC or DC) Typical Power
Consumption (AC or DC) Switch
4,920.308 BTUs 1442 W 638 W Cisco Nexus
9332D-GX2B
Power Specifications
Power specifications include the specifications for each type of power supply module.
Cisco Nexus 9332D-GX2B NX-OS Mode Switch Hardware Installation Guide
36
System Specifications
Switch and Module Weights and Quantities