Cisco Linksys WRT54G3GV2-ST, User Manual

Page: 14 / 21

Chapter3
Advanced Configuration
13
Wreless-G Router for Moble Broadband
DynDNS.org
Setup > DDNS > DynDNS
Username
Enter the Username for your DDNS account.
Password Enter the Password for your DDNS account.
Host Name This is the DDNS URL assigned by the DDNS
service.
System Select the DynDNS service you use: Dynamc ,
Statc , or Custom . The default is Dynamc .
Mal Exchange (Optonal) Enter the address of your mail
exchange server, so e-mails to your DynDNS address go to
your mail server.
Backup MX This feature allows the mail exchange server
to be a backup. To disable this feature, keep the default,
Dsabled . To enable the feature, select Enabled . If you
are not sure which setting to select, keep the default,
Dsabled .
Wldcard
This setting enables or disables wildcards
for your host. For example, if your DDNS address is
myplace.dyndns.org and you enable wildcards, then
x.myplace.dyndns.org will work as well (x is the wildcard).
To disable wildcards, keep the default,
Dsabled
. To enable
wildcards, select
Enabled
. If you are not sure which setting
to select, keep the default,
Dsabled
.
Internet IP Address
The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status
The status of the DDNS service connection is
displayed here.
Update
To manually trigger an update, click this button.
Click
Save Settngs
to apply your changes, or click
Cancel
Changes
to cancel your changes.
TZO.com
Setup > DDNS > TZO
E-mal Address, TZO Key, and Doman Name Enter the
settings of the account you set up with TZO.
Internet IP Address
The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status
The status of the DDNS service connection is
displayed here.
Update
To manually trigger an update, click this button.
Click
Save Settngs
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs will require
you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
Setup > MAC Address Clone
MAC Address Clone
Enabled/Dsabled
To have the MAC Address cloned,
select
Enabled
.
MAC Address
Enter the MAC Address registered with
your ISP here.