Cisco Linksys WPS54G, User Manual

Page: 6 / 40

Wireless-G PrintServer
Figure 5-5: Setup Complete 21
Figure 5-6: Wireless-G PrintServer Setup 22
Figure 5-7: Wireless-G PrintServer Diagnostic - Check Printer
Driver Installation
22
Figure 5-8: Printer Driver Not Installed 22
Figure 5-9: Wireless-G PrintServer Diagnostic - Check Network Status 23
Figure 5-10: Wireless-G PrintServer Diagnostic - Congratulations 23
Figure 5-11: PrintServer Diagnostic Icon 24
Figure 5-12: PrintServer Info 24
Figure 5-13: Right-click Icon 24
Figure 6-1: Setup Tab 26
Figure 6-2: Protocol Tab - TCP/IP 27
Figure 6-3: Protocol Tab - AppleTalk 28
Figure 6-4: Protocol Tab - NetBEUI 29
Figure 6-5: Protocol Tab - SNMP 30
Figure 6-6: Wireless Tab - Basic 31
Figure 6-7: Wireless Tab - Security (WEP) 32
Figure 6-8: Wireless Tab - Security (WPA) 32
Figure 6-9: Printer - Internet Printing 33
Figure 6-10: Printer - Logical Port 34
Figure 6-11: Status Tab - Device 35
Figure 6-12: Firmware Upgrade 35
Figure 6-13: Status Tab - Printer 36
Figure 6-14: Status Tab - Wireless 36
Figure 6-15: Exit 36
Figure 7-1: Bi-Admin Setup Welcome 37
Figure 7-2: Choose Destination Location 38
Figure 7-3: Select Program Folder 38
Figure 7-4: Connected Protocol 39
Figure 7-5: Searching for Device 39
Figure 7-6: Bi-Admin Management Utility 40
Figure 7-7: Device Information 40
Figure 7-8: Printer Status 41
Figure 7-9: Configuration - System 42