30
Chapter 6: Configuring the PrintServer Using the Web-based Utility
The Protocol Tab - SNMP
Wireless-G PrintServer
The Protocol Tab - SNMP
Use this screen to view or change the PrintServer’s SNMP (Simple Network Management Protocol) settings.
The PrintServer supports SNMP, which allows network administrators to monitor and control the PrintServer
through the use of network management platforms, such as HP OpenView.
The appropriate MIB file must be imported into your SNMP management program using the Import-Compile
command. Check your program’s documentation for details on this procedure. The MIB file is named Mib2p.mib
and is provided in the MiB folder on the Setup CD-ROM.
General
SysContact
. Enter the name of the contact person in the
SysContact
field.
SysLocation
. Enter the location of the contact person in the
SysLocation
field.
Management Stations
Station No.
Select the number of the management station from the
Station No.
drop-down menu (1-4). Click the
Get Data
button to display the information for the selected station.
IP Address
. Enter the IP address of the management station running the SNMP program.
Community
. Enter the name of the SNMP community, which is usually
public
or
private
.
Access
. Select the level of access for this management station,
Not Accessible
,
Read-only
, or
Read/Write
.
Trap Receivers
Receiver No.
Select the number of the trap receiver from the
Receiver No.
drop-down menu (1-4). Click the
Get
Data
button to display the information for the selected trap receiver.
IP Address
. Enter the IP address of the trap receiver that will be sent the trap messages or notifications.
Community
. In the
Community
field, enter the name of the SNMP community, which is usually
public
or
private
.
Enable with Severity level
. To designate a severity level, click the checkbox next to
Enable with Severity level
.
From the following drop-down menu, select the desired level of severity, with 1 meaning least severe.
Click the
Save
button to apply your changes, or click
Cancel
to cancel your changes.
Figure 6-5: Protocol Tab - SNMP
Summary of Contents for Linksys WPS54G
Page 1: ......
