13
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installing the PrintServer
Wireless-G PrintServer
11. The
IP Settings
screen will appear. If your network uses a router with a DHCP setting that automatically
assigns IP addresses, select
Automatically obtain an IP address (DHCP)
. If your network uses a static IP
address, select
Set IP configuration manually
, and enter the IP Address, Subnet Mask, and Gateway in the
fields provided.
Click
Next
to continue, or click
Back
to return to the previous screen.
12. The
Set PrintServer’s Password
screen will appear. If you want to change your password, enter your current
password in the
Current Password
field. Enter the new password in the
New Password
field, and then enter it
again in the
Verify Password
field.
Click
Next
to continue, or click
Back
to return to the previous screen.
Figure 4-11: IP Settings
Figure 4-12: Set PrintServer’s Password
static ip address:
a fixed address assigned to
a computer or device connected to a network.
ip
(internet protocol): a protocol
used to send data over a network
ip address
: the address used to identify
a computer or device on a network
Summary of Contents for Linksys WPS54G
Page 1: ......
