![background image](http://html.mh-extra.com/html/cisco/linksys-wag325n/linksys-wag325n_user-manual_64959032.webp)
26
Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Wireless Tab
Wireless-N ADSL2+ Gateway
The Wireless MAC Filter Tab
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network’s radius.
Wireless MAC Filter
To filter wireless users by MAC Address, either permitting or blocking access, click
Enabled
. If you do not wish to
filter users by MAC Address, select
Disabled
.
Access Restrictions
•
Prevent. Click this button to block wireless access from the devices listed on this screen.
•
Permit. Click this button to allow wireless access by the devices listed on this screen.
MAC Address Filter List
Click the
Wireless Client List
button to display the Wireless Client List. It shows computers and other devices on
the wireless network. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Status. Click
the
Save to MAC Address Filter List
checkbox for any device you want to add to the MAC Address Filter List.
Then click the
Add
button. To retrieve the most up-to-date information, click the
Refresh
button. To exit this
screen and return to the
Wireless MAC Filter
screen, click the
Close
button.
MAC 01-50
. Enter the MAC addresses of the devices whose wireless access you want to block or allow.
When finished making your changes on this tab, click the
Save Settings
button to save these changes, or click
the
Cancel Changes
button to undo your changes. Click
Help
for more information.
Figure 5-20: Wireless MAC Filter
Figure 5-21: Wireless Client List