Cisco Linksys AG310 User Manual Download Page 18

Page: 18 / 88

Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu

ADSL2+ Gateway with VoIP

Set the Mode

201

Press

to select the router/

NAT mode.
Press

to select the bridge/

switch mode.

If the Voice Gateway acts as
the router for your network,
use the router/NAT mode.

If your network already has a
router, use the bridge/switch
mode.

Enable/Disable WAN Access to
the Web-based Utility

7932

Press

to enable.

Press

to disable.

Use this setting to enable or
disable WAN access to the
web-based utility. (This Utility
lets you configure the Voice
Gateway.)

Manual Reboot

732668

After you hear, “Option
successful,” hang up the
phone. The Voice Gateway will
automatically reboot.

Factory Reset

73738

Press

to confirm.

Press

(star) to cancel.

If necessary, enter the
password. The Voice Gateway
will request confirmation; enter

to confirm. You will hear,

“Option successful.” Hang up
the phone. The Voice Gateway
will reboot, and all settings will
be reset to their factory default
settings.

User Factory Reset

877778

Press

to confirm.

Press

(star) to cancel.

The Voice Gateway will request
confirmation; enter

confirm. You will hear, “Option
successful.” Hang up the
phone. The Voice Gateway will
reboot and all user-
configurable settings will be
reset to their factory default
settings.

Table 1: Interactive Voice Response Menu

Action

Command (press these
keys on the telephone)

Choices

Description

NOTE:

This feature may be protected by a

password available only from your ITSP.

If you need to enter a password, refer to the
following section, “Entering a Password.”

Summary of Contents for Linksys AG310

























































































Search results

Summary of Contents for Linksys AG310

Reviews:

Related manuals for Linksys AG310

Brands by name

Popular brands

Cisco Linksys AG310, User Manual

Search results

Summary of Contents for Linksys AG310

Reviews:

Related manuals for Linksys AG310

Brands by name

Popular brands