Screw hole for protective cover over USB
1
USB Type B (under a protective cover) Reserved to
be used with Modem for external provisioning.
2
Screw holes for protective cover over SIMs (one on
each side)
3
SIM0 (bottom) and SIM1 (top) Slots
4
Memory
The Cisco IR807 uses flash memory and main memory. The flash memory contains the Cisco IOS software
image and the boot flash contains the ROMMON boot code. All memory components are factory default and
not upgradeable by the end user.
The following table shows the memory allocation.
Specification
Memory
1GB
Default and maximum DRAM
4 GB eMMC
Default and maximum flash memory
Hardware Features
This section provides an overview of the following hardware features for the Cisco 807 ISR.
Platform Features for Cisco IR807
The following lists the hardware platform features for the Cisco IR807.
• External Power Entry
• Nominal: 12 to 48VDC
• Absolute: 9.6 to 60VDC
• 4-pin 3.8 mm EURO power connector
• External Reset/Recovery Push Button
• WWAN Modem
• Single multi-band 2G/3G/4G/LTE cellular modem
• Dual internal USIM Slots (2 SIM Slots). Provides reliability and multi-homing capabilities over
LTE and HSPA-based networks.
• WAN Ports
• 2x RJ45 10/100 Fast Ethernet
• Serial Ports
• Isolated 1 x RJ45 RS232 DTE Port
• Isolated 1 x RJ45 RS232 DCE Port, with
NO
DCD support
• USB Ports
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
14
Product Overview
Memory
