6
Pairing Your Remote Cont.
If your device cannot be paired using this alternate method, you may need to look up
the specific code for your device.
Visit http://www.urcsupport.com/html.php?page_id=711 to find the exact code for your
specific device. Use the following codes with the following steps.
1.
Press the
TV mode
key
2.
Press and hold the
Setup
button until the
TV Mode
button blinks twice
3.
Enter the code you found using the website above.
4.
Press the
Power
button to test the TV control. If the TV turns off, set up
is complete.
5.
If the TV does not turn off, repeat steps 1-5 using the next code provided.
Your Wireless Gateway
The Wireless Gateway connects with your Hawaiian Telcom TV and gives you
High-Speed Internet access. Connect your devices wirelessly or through one of the
four Ethernet ports. The Wireless Gateway settings are set to default when installed.
The default network name (labeled “SSID”) and password (labeled “Wireless Network
Key”) are located to the right of the barcode on the side of your Wireless Gateway.
