![background image](http://html.mh-extra.com/html/cisco/fm4200/fm4200_installation-and-configuration-manual_67774018.webp)
IMPORTANT
Prodigy 1.0 and Prodigy 2.0 are
not
compatible with each
other. Do not implement the two protocol versions within the
same network.
If you are expanding an existing network using new Cisco
hardware components, make sure that all components are
compatible with each other by:
1. Upgrading all network components within the same
network to firmware version 6.5 or higher, and:
2. Configuring all network components within the same
network to operate using
either
Prodigy 1.0 or Prodigy
2.0.
Use of Prodigy 1.0 is only recommended if the network
contains older Cisco devices that are not compatible with
Prodigy 2.0.
Select the Prodigy version you need by using the
General
Mode
page of the Configurator interface.
FM Racer
RACER™ is Cisco's web-based configuration portal. It is the primary
interface with which to configure Cisco radio devices.
You can operate FM Racer using any internet-connected computer with a
web browser.
IMPORTANT
For a detailed description of the differences between FM Racer
and the local Configurator interface, refer to
configuration using the configurator interface” (page 55)
3.2.3. Point-to-point wireless bridge
A point-to-point wireless bridge allows two local networks to communicate
with each other. A simplified example is shown in
.
In context of the overall network architecture, the two local networks are
called
network segments.
Getting Started
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 18 of 189