•
Terminal 5
of M12A (Green wire with white tracer) to
terminal 3
of
RJ45.
•
Terminal 6
of M12A (Orange wire with white tracer) to
terminal 1
of
RJ45.
•
Terminal 7
of M12A (Blue wire) to
terminal 4
of RJ45.
•
Terminal 8
of M12A (Green wire) to
terminal 6
of RJ45.
When splicing a female M12 A-coded eight-pin connector to one end of an
Ethernet jumper cable, and a male M12 X-coded connector to the other
end of the Ethernet jumper cable, the terminal assignments are as follows:
•
Terminal 1
of M12A (Blue wire with white tracer) to
terminal 7
of
M12X.
•
Terminal 2
of M12A (Brown wire with white tracer) to
terminal 5
of
M12X.
•
Terminal 3
of M12A (Brown wire) to
terminal 6
of M12X.
•
Terminal 4
of M12A (Orange wire) to
terminal 2
of M12X.
•
Terminal 5
of M12A (Green wire with white tracer) to
terminal 3
of
M12X.
•
Terminal 6
of M12A (Orange wire with white tracer) to
terminal 1
of
M12X.
•
Terminal 7
of M12A (Blue wire) to
terminal 8
of M12X.
•
Terminal 8
of M12A (Green wire) to
terminal 4
of M12X.
M12 X-coded
M12 X-coded connectors are used on all Cisco 4200-seriesand Cisco
4500-series units manufactured after September 2016.
When splicing a male M12 X-coded connector to one end of an Ethernet
cable, and a male RJ45 Ethernet connector to the other end of the
Ethernet cable, the terminal assignments are as follows:
Hardware installation
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 37 of 189
