manualshive.com logo in svg

Cisco Flex 7500 Series, Deployment Manual

Share
Download
Cisco Flex 7500 Series Deployment Manual Download Page 40

 

40

Flex 7500 Wireless Branch Controller Deployment Guide

 

  FlexConnect VLAN Based Central Switching

Step 6

Associate a client to the WLAN configured in Step 1 on this Flex AP and return VLAN 62 from the AAA 
server. VLAN 62 is not present on this Flex AP, but it is present on the WLC as a dynamic interface so 
traffic will switch centrally and the client will be assigned VLAN 62 on the WLC. In the output captured 
here, the client has been assigned VLAN 62 and Data Switching and Authentication are set to Central.

Note

Observe that although WLAN is configured for Local Switching, the Data Switching field for 
this client is Central based on the presence of a VLAN (that is, VLAN 62, which is returned from 
the AAA server, is not present in the AP Database).

Step 7

If another user associates to the same AP on this created WLAN and some VLAN is returned from the 
AAA server which is not present on the AP as well as the WLC, traffic will switch centrally and the client 
will be assigned the WLAN mapped interface on the WLC (that is, VLAN 61 in this example setup), 
because the WLAN is mapped to the Management interface which is configured for VLAN 61.

Summary of Contents for Flex 7500 Series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands