manualshive.com logo in svg

Cisco Flex 7500 Series, Deployment Manual

Share
Download
Cisco Flex 7500 Series Deployment Manual Download Page 18

 

18

Flex 7500 Wireless Branch Controller Deployment Guide

 

  AP Groups

Step 12

Verify the group creation by navigating to 

WLAN > Advanced > AP Groups.

Step 13

Click AP Group Name 

Store1 

to add or edit the WLAN.

Step 14

Click 

Add New 

to select the WLAN.

Step 15

Under WLAN, from the WLAN SSID drop-down, choose 

WLAN ID 17 store(17)

.

Step 16

Click

 Add 

after WLAN ID 17 is selected.

Step 17

Repeat steps (14 -16) for WLAN ID 1 DataCenter(1). This step is optional and needed only if you want 
to allow Remote Resource access.

Step 18

Go back to the 

WLAN > Advanced > AP Groups 

screen.

Step 19

Click AP Group Name 

Store2 

to add or edit WLAN.

Step 20

Click 

Add New

 to select the WLAN.

Step 21

Under WLAN, from WLAN SSID drop-down, choose 

WLAN ID 18 store(18)

.

Step 22

Click 

Add

 after WLAN ID 18 is selected.

Step 23

Repeat steps 14 -16 for WLAN ID 1 DataCenter(1).

Summary of Contents for Flex 7500 Series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands