manualshive.com logo in svg

Cisco Flex 7500 Series, Deployment Manual

Share
Download
Cisco Flex 7500 Series Deployment Manual Download Page 36

 

36

Flex 7500 Wireless Branch Controller Deployment Guide

 

  FlexConnect VLAN Based Central Switching

Step 10

Associate a client on this WLAN and authenticate using the user name configured in the AAA server in 
order to return the AAA VLAN.

Step 11

The client should receive an IP address from the dynamic VLAN returned via the AAA server.

Step 12

In order to verify, click 

WLC GUI > Monitor > Client

, click the specific client MAC address in order 

to check the client details.

Limitations

•

Cisco Airespace-specific attributes will not be supported and IETF attribute VLAN ID will only be 
supported.

•

A maximum of 16 VLANs can be configured in per-AP configuration either via WLAN-VLAN 
Mapping for individual FlexConnect AP or using ACL-VLAN mapping on the FlexConnect group.

FlexConnect VLAN Based Central Switching

In controller software releases 7.2, AAA override of VLAN (Dynamic VLAN assignment) for locally 
switched WLANs will put wireless clients to the VLAN provided by the AAA server. If the VLAN 
provided by the AAA server is not present at the AP, the client is put to a WLAN mapped VLAN on that 
AP and traffic will switch locally on that VLAN. Further, prior to release 7.3, traffic for a particular 
WLAN from FlexConnect APs can be switched Centrally or Locally depending on the WLAN 
configuration.

From release 7.3 onwards, traffic from FlexConnect APs can be switched Centrally or Locally depending 
on the presence of a VLAN on a FlexConnect AP.

Summary

Traffic flow on WLANs configured for Local Switching when Flex APs are in Connected Mode:

•

If the VLAN is returned as one of the AAA attributes and that VLAN is not present in the Flex AP 
database, traffic will switch centrally and the client will be assigned this VLAN/Interface returned 
from the AAA server provided that the VLAN exists on the WLC.

•

If the VLAN is returned as one of the AAA attributes and that VLAN is not present in the Flex AP 
database, traffic will switch centrally. If that VLAN is also not present on the WLC, the client will 
be assigned a VLAN/Interface mapped to a WLAN on the WLC.

Summary of Contents for Flex 7500 Series































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands