Cisco EHWIC E Series, Hardware Installation Manual

Page: 59 / 62

1. Load a compatible Cisco IOS image. See the “Cisco ISR 4000, E-Series Server, NCE, CIMC and Cisco
IOS Software Release Compatibility” section in the
Release Notes for Cisco UCS E-Series Servers and
the Cisco UCS E-Series Network Compute Engine, Release 3.x.
2. Connect the NIM E-Series NCE to the network and then power up the router and the NIM.
3.
Verify that the router recognizes the NIM E-Series NCE. See the Verifying NIM E-Series NCE Installation,
on page 59 .
Verifying NIM E-Series NCE Installation
Before You Begin
1. Install the NIM E-Series NCE into the router.
2.
Load a compatible Cisco IOS image. See the “Cisco ISR 4000, E-Series Server, NCE, CIMC and Cisco
IOS Software Release Compatibility” section in the
Release Notes for Cisco UCS E-Series Servers and
the Cisco UCS E-Series Network Compute Engine, Release 3.x.
3. Power on the NIM E-Series NCE.
Procedure
To verify the NIM E-Series NCE installation, use one of the following commands:
• To display a high-level overview of the entire physical system, use the show platform command:
Router# show
platform
Chassis type: ISR4351/K9
0/1
UCS-EN140N-M2/K9 ok 3w5d
1/0 UCS-E140DP-M1/K9 ok 4w6d
2 ISR4351/K9 ok 5w2d
R0 ISR4351/K9 ok, active 5w2d
F0 ISR4351/K9 ok, active 5w2d
P0 PWR-4450-AC ok 5w2d
P2 ACS-4450-FANASSY ok 5w2d
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0
14080523 15.4(3r)S1
1 14080523 15.4(3r)S1
2 14080523 15.4(3r)S1
R0 14080523 15.4(3r)S1
F0 14080523 15.4(3r)S1
• To verify that the router recognizes the server, use the
show hw-module subslot all oir
command:
Router# show hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/0
ISR4351-3x1GE ok
subslot 0/1 UCS-EN140N-M2/K9 ok
subslot 1/0 UCS-E140DP-M1/K9 ok
Online Insertion and Removal—NIM E-Series NCE
Online insertion and removal (OIR) provides uninterrupted network operation, maintains routing information,
and ensures session preservation on the Cisco ISR 4000 series. You can use online insertion and removal to
install or replace hardware without affecting system operations.
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
59
Verifying NIM E-Series NCE Installation