HDD
2
CMOS battery (located under the daughter card)
1
SD0
The SD0 card contains the Cisco Integrated
Management Controller (CIMC) software
and must always be present.
Note
4
Memory DIMM slots (located under the
daughter card)
3
NIM E-Series NCE LEDs
The following table lists the NIM E-Series NCE LEDs and describes the LED colors and states.
Table 18: NIM E-Series NCE LEDs
State
Color
LED
• Steady—CIMC and the CPU are both operating normally.
• Blinking—The CPU is operating normally, and CIMC is booting up.
Green
Power
• Steady—CIMC is operating normally, and the CPU is powered down.
• Blinking—CIMC is in the process of booting up, and the CPU is powered
down.
Amber
Steady—Operation is normal.
Note
If DRAM is not detected, the SYS LED still displays solid green.
Note
• Blinking—System is booting before entering the EFI shell.
Green
SYS
Fault is detected on the processor.
Amber
Blinks when the CIMC is operating normally.
Green
IMC
Blinks when the SSD is operating normally.
Green
SSD
Left LED shows the condition of the traffic:
• Blinking—Traffic is detected.
• Off—There is no traffic.
Green
GE Port
LEDs
Right LED shows whether the link is established:
• Steady—Link is established.
• Off—No link is established.
Green
Basic Workflow for Installing the NIM E-Series NCE in the NIM Slot
Procedure
Purpose
Command or Action
Action
Step 1
Reference Topic
Step 2
Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine Hardware Installation Guide
56
NIM E-Series NCE LEDs
